If you follow the below listed checks, and do adjustments as necessary, going from the truss rod to the tailpiece setting, you will not have to repeat any adjustments that may have been thrown off by doing them in the wrong sequence. Deering truss rods provide the ability to adjust the neck to arch back, flat, or bow up. The truss rod is a nice feature. The truss rod is usually some sort of steel threaded rod that is embedded in a fretted instrument neck beneath the fingerboard. And more time to focus on playing! The length keeps your knuckles safely away from the peghead. You can adjust the truss rod with a nut located at one end. TRUSS ROD ADJUSTMENT: The truss rod in your neck is used to adjust the curve/relief of the neck. THE COORDINATOR RODS Banjo Setup File #7 DISCLAIMER Adjusting the coordinator rods during banjo setup should only be done by people who know what they are doing, particularly on instruments that are under warranty. So, there you have it. Be wary of truss rods in “budget” instruments which may have problems a truss rod won’t fix. Improve this article for others! The neck of most guitars has what’s known as a truss rod, which is a one- or two-piece adjustable metal rod that goes down the inside of the center of the neck. And, for the player with the magical Goodtime banjo design you have a reliable banjo neck. FOOTNOTES. A banjo has a lot of "moving parts" to consider for a proper set up, but this will get you started. TOOLS: ¼” deep socket wrench/nut driver, small Philips screw driver, pen. The Truss Rod Wrench is a 1/4" socket wrench for adjusting your truss rod on Deering, Vega, and Tenbrooks banjos. Proper banjo set-up must be done in stages so that repetition of steps done out of sequence is eliminated. Leave a comment about your experience adjusting your truss rod, and include your own tips. And as mentioned above, the head tension also contributes to the action height. If you break your lag bolts or damage the rim, the … The length, comfortable rubberized handle, and durability let you per If you happen to have a truss rod, I would use it to adjust the neck relief (amount of bow) first. There are adjustable truss rods that offer “adjustment” to the amount of curvature in the neck and there are truss rods that are … But only when it is truly needed. A Truss Rod Wrench is used to adjust the curve of your banjo fingerboard.